Elba is my first prototype. She's with a tester now to see how we she goes. Elba is a one-strap cement construction clog. The clog is a complete component made of wood with a rubber sole from Italy -very chic. I chose to use a padded insole, again using the cork. My goal was to align the fit of the insole better to the outsole and cover the insole in a cleaner manner than I had done on my recycled shoes. I even tried my hand at shaping the insole to the outsole (note the curve). I did a better job on the cover. You can see improvement in the edges and skiving. Sadly I didn't do too well on the size. In the end my insole is a bit too large. Lesson learned. Trim the insole before covering it. The decision to cut inside, outside or on a line can add or subtract a significant amount of area when several materials and components come together. Next I attacked the weight of the leather. I have a quantity of lightweight leather that I am using for much of my prototyping. Originally, I was going to secure the strap to the insole, but as my design developed, I decided on clog construction with decorative nails directly attaching the strap to the wood outsole. Either way, I thought the leather was too flimsy, so I backed it with cork to give it enough body. This was imperative for the nail method to work. You can see I glued my edges as if they were sewn. I skived the interior of the edges to try to get a smooth edge against the foot with partial success. I had given up on the flower before I backed my strap, but as you can see, I found a really great resolution. I merely cut the floral shape and balled up the leather to create a distressed and wrinkled effect. I attached the shapes to the strap with thin leather cord that acts as the pistils. In my next pair, this will happen before I back the strap. The nails were also a trip. A couple didn't nail in smoothly and making them symmetrical was a chore. If you look carefully at the side view you will see that I chose to use only 3 nails, my aesthetic preference. That might be a mistake. I'll have to see what my tester says about how they hold up.