Meet Elba the one-strap clog

Meet Elba
Meet Elba
Elba is my first prototype. She's with a tester now to see how we she goes. Elba is a one-strap cement construction clog. The clog is a complete component made of wood with a rubber sole from Italy -very chic.
Elba shaped insole
Elba shaped insole
I chose to use a padded insole, again using the cork. My goal was to align the fit of the insole better to the outsole and cover the insole in a cleaner manner than I had done on my recycled shoes. I even tried my hand at shaping the insole to the outsole (note the curve).  I did a better job on the cover. You can see improvement in the edges and skiving. Sadly I didn't do too well on the size. In the end my insole is a bit too large. Lesson learned. Trim the insole before covering it. The decision to cut inside, outside or on a line can add or subtract a significant amount of area when several materials and components come together.
Elba Strap Construction
Elba Strap Construction
Next I attacked the weight of the leather. I have a  quantity of lightweight leather that I am using for much of my prototyping. Originally, I was going to secure the strap to the insole, but as my design developed, I decided on clog construction with decorative nails directly attaching the strap to the wood outsole. Either way, I thought the leather was too flimsy, so I backed it with cork to give it enough body. This was imperative for the nail method to work. You can see I glued my edges as if they were sewn. I skived the interior of the edges to try to get a smooth edge against the foot with partial success.
Elba Flower
Elba Flower
I had given up on the flower before I backed my strap, but as you can see, I found a really great resolution. I merely cut the floral shape and balled up the leather to create a distressed and wrinkled effect. I attached the shapes to the strap with thin leather cord that acts as the pistils. In my next pair, this will happen before I back the strap. IMG_3550 IMG_3551The nails were also a trip. A couple didn't nail in smoothly and making them symmetrical was a chore. If you look carefully at the side view you will see that I chose to use only 3 nails, my aesthetic preference. That might be a mistake. I'll have to see what my tester says about how they hold up.  

Recycling experiment = New Shoes

Recycling experiment: What would I get if I took apart a shoe I didn't like so much and a Betsey Johnson hand bag that didn't cut it and created a new shoe? This is the question I asked myself in June as the Shoe Symposium grew closer. I hadn't made any shoes in over year and I was determined to make something so I could get back into making and get some feedback as well.
sandal components
Sandal Components
Betsey Johnson Handbag
Betsey Johnson Handbag
I started by breaking down a very inexpensive pair of sandals. The wedge fit well, but I never liked the upper. No problem. I had a Betsey Johnson hand bag that had great leather and hardware, but I hated the style. So I broke that down as well.
Insole and cork glued up
Insole and cork glued up
Insole covered with Cork
Insole covered with Cork
I knew I wanted to use cork for the insole. I like a slightly textured insole so my feet don't slip. I used cement to cover the insoles and some clamps to help keep them tight while they dried.     Next, I prepared straps. Some went through vintage buckles. Others had hardware. I explored the potential on forms:
Design Development 1
Design  1
Design Development 2
Design  2
Design Development 3
Design  3
Design Development 4
Design  4
Design Development 5
Design  5
        And on feet:
Design on Foot 3
Design on Foot 3
Design on Foot 2
Design on Foot 2
Design on Foot 1
Design on Foot 1
        I made my final choice and put it all together:
Completed recycled sandal
Completed recycled sandal
These were entered into competition at the Shoe symposium primarily for feed back. I knew there were quite a few mistakes, but I wanted to pros to tell me what they saw, both good and bad. The critics did NOT know these were recycled. As with all design critique, I got quite a range. On the craft side, I needed to work on my insole and outsole alignment and getting my straps symmetrical on both feet.  Other comments included a discussion of leather to hardware weight and I had worn them too much for competition (these were recycled soles).
finished recycled sandal
Finished recycled sandal
The critics were split on the cork insole cover. (I used this because I wanted to work with cork.) One critic loved the juxtaposition of cork with the metallic. One critic said the cork was too casual with the metallic. One critic did not comment. I am thankful for the feedback and continue to work to correct the craft issues with each pair I make. I'm proudof the aesthetics and I'm happy to wear them. This recycling experiment makes me happy. I have the style shoe I like with the leather and hardware that suits me. These are truly greater than the sum of their parts.

Back to my Journey

It's time to get back to my journey and sharing it with you. I've had a very shoe- centric 3 months. It's been exciting and exhilarating and best of all, I've carved a path forward with my business. As many of you know, I had not been able to practice my shoe making skills. My full-time job and personal issues were keeping me very busy. Last summer, I  made a decision to make some big changes that would allow me to focus on shoe making. I've stepped down from my full-time teaching position as of August 31, 2016. I've beefed up my consultancy, ONO made in the 191. I attended a Shoe Symposium in Ashland, Oregon and re-connected with my teacher Bill Shanor from Bonney & Wills. The biggest gain from this experience was a bunch of small quantity suppliers. These relationships have been critical in my path forward. I also made a connection with Iron Horse Boots who has a similar business model to me. I am hopeful we can collaborate and support each other as we move forward. Since May, I've been working on making. I started with a recycled sandal and since have moved into 6 styles of women's sandals. I'll share each with  you in my next posts. The plan is to work on my craft, work through prototyping and have the prototypes tested. So far so good. I'm concentrating on cement construction just now.
Singer Post Bed
Vintage Singer Post Bed Machine on a Reading Table.
The next batch will include sewing with my fabulous new (to me) Singer Post Bed Machine. I'm partnering with screenprinter/bag maker, Tim Eads. His fabric, my designs to make a men's loafer style deck shoe and women's espradrilles. The bases have just arrived via Esty. I'm back and ready to share my journey with you. Sit back and enjoy.

Shoe Pop at International Pop

shoe pop Delila doble plataforma 1967
Delila doble plataforma 1967
Shoe Pop at the Philadelphia Museum of Art's new exhibit, International Pop. There's not much fashion included, but this display sure does make a statement. Created by Argentinian artist, Dalila Puzzovio in 1967 as a reaction to the lack of response to trends in Argentinian Fashion, these colorful shoes were an avante-garde, contemporary couture contrast to the usual (at the time) black and brown styles of the day. The award winning sculpture was displayed in the windows of Argentinian shoe chain, Grimoldi, the perfect foil for blurring the lines between mass-production and Art. These baby are certainly part of the shoe vernacular today. International Pop February 24, 2016 - May 15, 2016    

And the winner is…

Heck with the dresses on the red carpet, the shoe design winner is Jimmie Choo. I wish the starlet would choose gowns that show their shoes, but that is generally not the case. Thank heaven for Footwear News's big reveal. Charlize Theron, Reese Witherspoon, Olivia Munn, Isla Fisher and Heidi Klum all sported various sparkly, stiletto sandals with minimal straps. This year featured the platform Pearl (a rising red carpet star) that gives height, other popular styles - the Molly and the Minnie
The Minnie
Minnie
the molly
Molly
Pearl
Pearl
.